WD 2019_Flip
NIPPONDENSO / SAMLIN COMPRESSOR CLUTCHES
C
If part number on clutch being replaced cannot be read use following procedure to determine required clutch part number. 1. Determine if clutch is double or single groove. 2. Determine if 12 or 24 volt. 3. Measure outside diameter“ A ”of pulley.
l Clutches are listed by pulley diameter l All keys are 5 ⁄ 32 ”. l “D”dimension is 0.62”on all double groove clutches.
A
4. Measure width of pulley groove“ C ”. 5. Measure the“ B ”dimension accurately.
D B
CLUTCH SPECIFICATIONS Clutches are sorted by increasing size of Pulley Diameter [ A ] [ A ] | [ C ] [ B ] Pulley | Gauge Line
Red Dot Red Dot
Diameter | Grooves Width
Dimension Volts Description
No.
Factory No.
75R4762 RD-5-10359-0P 75R4702 RD-5-10401-0P 75R4742 RD-5-10357-0P 75R4732 RD-5-9657-0P
4 1⁄2” 4 7⁄8”
Poly 7 Poly 6 Poly 6
1⁄8” 1⁄8” 1⁄8”
7⁄8” — 3⁄4”
12 FX-15 / 2 prong Ford integral, 21 spline
12 FS-6 / 2 prong Ford integral
5”
12 FX-15 / 2 prong Ford integral, 21 spline 12 FS-6 / 3 eye-2 prong Ford integral
5 7⁄8”
1
7⁄16”
1 3⁄8”
CLUTCHES 75R4702
75R4742
RD-5-10401-0P
RD-5-10357-0P
OE # F10H-19D798AA, F20H-19D786-AA Model: FX-15 Diameter: 5” Groove: Poly 6 Width: 1⁄8” 12 Volts B Dimension: - 3⁄4” Two-prong Ford integral, 21 spline
Model: FS-6 Diameter: 4 7⁄8” Groove: Poly 6 Width: 1⁄8” 12 Volts B Dimension: - Two-prong Ford integral 75R4732
RD-5-9657-0P
OE # 518484, FF-E4TH-BA1 Model: FS-6 Diameter: 5 7⁄8” Groove: 1 Width: 7⁄16” 12 Volts B Dimension: 1 3⁄8” Two-prong Ford integral
PAGE 330
Made with FlippingBook HTML5