2024 WD CATALOG

75R SERIES SANDEN COMPRESSORS

75R SERIES

SANDEN COMPRESSORS

SANDEN’S NEW, FLEXIBLE COMPRESSOR SERIES – FLX7

FLX7

Bore

1.153 in. (29mm) 1.29 in. (33mm) 9.5 cu. in. (155cc)

Stroke

FLX7 Features and Benefits l The FLX7 utilizes interchangeable parts to increase flexibility and adaptability to a variety of vehicle applications. FLX7 compressors come standard with enhanced features previously found only on premium compressors. Features and benefits include: l A variety of clutch rotor configurations: single, double, sealed heavy-duty and multi-groove rotors are available in 12 and 24 volt options. l Each FLX7 comes with both a bullet and a sealed Packard clutch lead wire terminal for application flexibility. l For protection, every FLX7 comes equipped with a pressure relief valve to guard against abnormal pressure conditions. A field coil diode is also included to prevent electrical damage caused by voltage surges. l The FLX7 uses a standard GM pad-style cylinder head which receives a variety of port fittings ready to accommodate vertical and horizontal hose attachment. The port fittings are sold separately from the com pressor, allowing the user to adapt a single compressor to fit many applications. l Each port fitting is made of forged steel for superior strength vs. cast iron fittings.

SD7H15 Durability l The FLX7 starts with the same SD7H15 com pressor known throughout the automotive industry for its performance and durability. l Seven cylinders for reduced operating pulsations, reduced noise and improved performance. l Available in ear mount or direct mount configurations for flexibility and adaptability over a broad range of applications. l Superior lubricating system for increased durability and high temperature perfor mance. l Heavy-duty bearing to handle higher pres sures and loads. l Shaft seal for greater leak protection and durability.

Typical Applications l FLX7 are designed for use with: l Light Passenger Vehicles l Medium Duty and Heavy Trucks

Displacement per Revolution

Number of Cylinders

7

Maximum Allowable Continuous R.P.M. Normal Operating Conditions)

6,000

l Construction Vehicles l Agricultural Vehicles l Passenger Buses

Refrigerant Oil (SP15)

R 134A

6.75 fl. oz. (200cc) 16.4 lbs (7.4 kg)

Weight Rotation

Clockwise

196mm

83mm

90°

90°

Mounting options up to 90° from vertical.

119mm DIAMETER

104mm

NOTE: Photos at left and above are shown with one of several options for clutches and cylinder head.

212mm 112mm

125mm 104mm

SANDEN FLX-7 REAR PORT FITTING ADAPTERS Compressor heads shown for reference only

75R89305

75R89310

75R89315

75R89320

75R8510

RD-5-10880-0P

RD-5-10881-0P

RD-5-10882-0P

RD-5-10883-0P

RD-5-9154-0P

COMPRESSOR

Horizontal O-Ring 3⁄4” X 7⁄8”

Vertical O-Ring 3⁄4” X 7⁄8”

Vertical O-Ring 1” X 14

Vertical Flare 3⁄4” X 7⁄8”

Horizontal O-Ring 1” X 14

COMPRESSOR

FLX 7 WIRE ADAPTER

Red Dot No. 75R89327

Factory No.. RD 5-11007-0P

Description

Converts Single Wire to Dual Wire

PAGE 334

PAGE 335